User Manual

SETTING THE ALARM
The GTQ-RENEW lets you have 2 independent alarm settings.
1. In standby mode, press and hold the AL 1/VOL- button for 1-2 seconds to enter the alarm
time setting mode. When you have entered ALARM SET mode the alarm time will be
flashing on clock screen along with the alarm 1 (or alarm 2) icon.
2. In alarm setting mode, press the AL 1/VOL- button repeatedly to cycle through the alarm
setting options, these are: Alarm time > Alarm sound source (bb = buzzer, rd = radio) >
Alarm volume level.
3. Setting alarm time: Press HOUR/TUN- to set the hour and MIN/TUN+ button to set the
minute. Press AL 1/Vol- button to confirm.
4. Setting alarm sound source: Press the HOUR/TUN- or MIN/TUN+ button to choose rd for
FM radio or bb for buzzer as the alarm sound source. The corresponding alarm indicator on
display will blink accordingly to your selection: Indicator “bb” or “rd FM” will blink on display.
Press AL 1/Vol- button to confirm.
5. Setting alarm volume level: Press the HOUR/TUN- or MIN/TUN+ button to set alarm volume
(level 5 – 15). Press AL1/VOL- button to confirm once you have chosen your preferred
alarm volume level.
6. Once the alarm setting is complete, the alarm will be set to on with the corresponding alarm
indicator displayed on the clock screen.
7. When alarm goes off, the volume will gradually increase from volume level 1 up to the
volume level you set for your alarm.
8. To set alarm 2 follow step 1-7, replacing AL 1/Vol- with AL 2/Vol+
TURNING THE ALARMS ON OR OFF
When the display shows the clock time, single press AL 1/Vol- or AL2 /Vol+ button to enable
or disable the respective alarm. The corresponding Alarm 1 or Alarm 2 indicator will be
displayed on the screen when the alarm is enabled.
SNOOZE
1. When the alarm goes off, the corresponding Alarm 1 or Alarm 2 indicator will flash on the
display.
2. Press the SNOOZE/SLEEP/DIMMER button to temporarily deactivate it. The snooze
function will snooze your alarm for 9 minutes.
3. The corresponding Alarm 1 or Alarm 2 indicator will flash on the display during the snooze
period.
4. To cancel the snooze and the alarm, press POWER/RADIO/AL OFF button.
TO STOP THE ALARM WHEN ALARM GOES OFF
1. Press POWER/RADIO/AL OFF button to stop the alarm.
2. Alarm indicator will still stay on and the alarm will sound on the following day.