User Manual

DISPLAY DIMMER
1. In standby mode, press the SLEEP/DIMMER/SCAN/SNOOZE button to change the
brightness level of the display: high, low or off.
2. Default dimmer level is “low”.
3. If display is set to OFF and an alarm is set and comes on then the display will switch back
on when the alarm sounds. When the alarm is switched off the display will turn back off also,
after a few seconds.
USB charging (5V out)
The USB port is designed for charging external devices such as smart phones. Simply
connect your own USB cable to the clock and other end to your phone.
WIRELESS CHARGING
1. Place your Qi enabled smartphone on the center of the wireless charging pad on the rear
of the clock radio.
2. Please check if your phone screen shows charging status. When wireless charging, the
clock radio displays a blue wireless charging icon flashing on screen.
If your phone is not charging;
- Check if your device supports Qi wireless charging. The clock radio will only be able to
charge phones that have Qi wireless charging already built in.
- Make sure your phone is sat in the center of the charging cradle.
- Remove your phones case, as this could be blocking Qi wireless charging.