Operation Manual

Usage and Maintenance Instructions Ver. 1 07/2013 (2667)

INTRODUCTION

Thank you for deciding to purchase the Foot & Leg Cover for Scooter/Wheelchair

Users from Aidapt. The Foot & Leg Cover is manufactured from the finest materials

available. When used correctly it is designed to give many years of reliable, trouble-

free service.

NB. This equipment must be installed by a competent person.

BEFORE USE

• Carefully remove all packaging. Avoid using any knives or other sharp

instruments as this may damage the item.

• Check the product for any visible damage If you see any damage or

suspect a fault, do not use your product, but contact your supplier for

support.

FITTING INSTRUCTIONS

The Foot & Leg Cover can easily be slipped on and off:

• Unzip the opening fully

• Put the Foot & Leg Cover on the seat of the scooter or wheelchair, with the

opened sections spread to either side.

• Carefully position yourself (or the user) in the seat on top of the opened

Foot & Leg Cover, with your feet placed firmly in the foot area

• Use the full length zip to close the Foot & Leg Cover up to the waist

• Hook elastic loops over pushign handles, where applicable.