Operation Manual

Assembly and Operating Instructions Ver. 4 01/14 (2286)

ii. The footplates are designed only to support the feet while in the

seated position. DO NOT STAND ON THE FOOT PLATES.

iii. WARNING: Surface areas of your chair can get hot when the

chair is exposed to external sources of heat (e.g. sunlight).

• Please now refer to the section on Assembly and use.

ASSEMBLY

1. First remove all contents from the box.

2. To open the chair, push seat rails and press downwards until the

chair is fully opened taking care to keep fingers clear of moving parts

(Fig. 1).

3. To close the chair, take the centre of the seat fabric at the front and

back edges and lift (Fig. 2).

Note: The seat rails must be fully engaged in the seat frame support

brackets before sitting down.

Fig. 1 Fig. 2

Note: When opening and closing your chair please keep fingers well

away from any possible entrapment areas.

The only part of the chair that can be adjusted are the leg rests. Ideally your

knees should be at 90 degrees with the seat. If you are not sure please

contact a healthcare professional or your local dealer for advice.