User Manual

Fixing and Maintenance Instructions Ver. 5 05/2014 (1549)
2
INTRODUCTION
Thank you for deciding to purchase the Malling Perching Stool from Aidapt. The
Malling Perching Stool range is manufactured from the finest material and components
available, when installed and used correctly it is designed to give many years of reliable
trouble-free service. The Malling Perching Stool is available with optional arms, back or
padded back.
Malling Perching Stools are delivered complete and do not require assembly.
N.B. This equipment must be installed by a competent person and a risk
assessment may be needed as to the suitability of the chair for the particular user.
VG833 Malling Perching Stool (Plain)
VG834 Malling Perching Stool (Arms Only)
VG835 Malling Perching Stool (Arms & Plain Back)
VG836 Malling Perching Stool (Plain Back Only)
VG837 Malling Perching Stool (Arms & Padded Back)
VG837P Malling Perching Stool (Padded Arms & Padded Back)
VG837B Black Malling Perching Stool (Arms & Padded Back)
VG837BR Brown Malling Perching Stool (Arms & Plain Back)
159 kg (25 stone) weight limit.
Do not exceed the weight limit stated – doing so could damage the equipment or
put the user at risk.
BEFORE USE
Carefully remove all packaging. Avoid using any knives of other sharp instruments as
this may damage the surface of the product.
Check the product for any visible damage If you see any damage or suspect a fault, do
not use your product, but contact your supplier for support.
USE OF THE PERCHING STOOL
When moving always lift the perching stool by placing you hands on the tubular metal
frame beneath the seat.
Do not allow children or unauthorised persons to play with or use the stool.
Do not rock back and forth or sideways when using the stool as this will cause
excessive stress and possible damage and failure which may cause injury.