Aluminium Walking Frames Fixing and Maintenance Instructions EN
INTRODUCTION Thank you for deciding to purchase the Aluminium Walking Frame from Aidapt. When used correctly it is designed to give many years of reliable trouble-free service. The Aluminium Walking Frame is available in various sizes, with or without wheels. Please Note: Always consult with the prescriber/Physiotherapist if you are in any doubt that this product is suitable for your use.
HEIGHT ADJUSTMENT Remove the āEā clip from the extension leg and extend all legs evenly to the desired height ensuring you do not exceed the last punched hole of the extension leg. (See fig. 1) Once you have achieved the desired height; reinstall the āEā clip, ensuring that it has passed through the extension leg and that it fits neatly and snugly around the outside leg. (See fig. 2) GETTING INTO AND OUT OF CHAIRS 1. Position the frame in front of the chair. 2.
CLEANING All of the product components are manufactured from quality materials. However, it is very important that you only clean your walking frame using a non-abrasive cleaner or mild detergent with a soft cloth. Avoid using lime scale remover; abrasive cleaners e.g. AJAX and or abrasive cleaning pads may seriously damage your product beyond repair. REISSUE If you reissue or are about to reissue this product, please thoroughly check all components for their safety.