Operation Manual

Fixing and Maintenance Instructions Ver. 3 08/2012 (1572)
3
HEIGHT ADJUSTMENT
Remove the ‘E’ clip from the extension leg and extend all legs evenly to the desired
height ensuring you do not exceed the last punched hole of the extension leg. (See fig.
1)
Once you have achieved the desired height; reinstall the ‘E’ clip, ensuring that it has
passed through the extension leg and that it fits neatly and snugly around the outside
leg.
(See fig. 2)
GETTING INTO AND OUT OF CHAIRS
1. Position the frame in front of the chair.
2. Get up by pushing on the arms of the chair and transfer hand to frame when
fully standing.
3. To sit down, using the frame, turn round in front of the chair and feel using
wheeled frames, the rear legs the chair behind you with your legs.
4. Place hands gently on the chair arms, bend slightly forward and sit down
gently.
GENERAL SAFETY
1. Use a chair with high seat and arms to help you sit and stand up with ease.
2. Remove obstacles such as loose rugs, draught excluders and worn floor
coverings.
3. Ensure lighting in hallways and stairways is adequate.
4. Wear flat, supportive shoes.
5. Avoid wet floors.
6. Beware of outdoor hazards including uneven surfaces, wet leaves and ice.
7. Do not store this product in temperatures below freezing.
8. Take special care if carrying a bag or similar package.