Tri-Wheeled Walkers VP174SS – Blue Tri Walker with Bag VP174RS – Red Tri Walker with Bag VP174SS/N – Blue Tri Walker No Bag VP174RS/N – Red Tri Walker No Bag Basket available to buy separately – VP103 User Guide with Fixing and Maintenance Instructions EN
This file is available to view and download as a PDF at www.aidapt.co.uk. Sight impaired customers can use a free PDF Reader (such as adobe.com/reader) to zoom in and increase the text size for improved readability. INTRODUCTION Thank you for choosing your Aidapt Tri-walker. Your tri-walker has been designed to assist the user to walk and carry small items of shopping with our optional special shopping bag designed specifically to fit your triwalker. Only use bags supplied and designed for your Tri-walker.
ASSEMBLY INSTRUCTIONS 1. Carefully remove all packaging. Check the product thoroughly for damage or obvious faults. If you suspect the unit to be faulty, please do not use, but contact your supplier immediately for service. 2. 3. 4. 5. 6. 7. Carefully insert the brake assembly (fig. 1) within the frame. Ensure when brake assembly is inserted that both brakes are even in height and the tri-walker is sitting evenly on the ground.
Fig. 4a Fig. 4b LOCKING MECHANISM 1. Open out the tri-walker frame by pulling the grip handles outwards in opposite directions forming a ‘V’ shape. Once this is completed pull/push the central locking bracket so the plates are parallel. Central Locking Bracket Ensure the frame is locked before using it and never use a semi-closed position as this may lead to the frame collapsing. 2. To close your tri-wheeled walker push open the central locking bracket and then apply Fig.
FITTING THE CARRY BAG (Should be already fitted) 1. 2. 3. The Tri-walker bag should be fitted when the walker is set in the open position. Take the strap situated upon the upper side of the tri-walker bag, and wrap this around the diagonal bar of the frame (fig. 7) and push the stud fasteners together. Repeat on the opposite side. Take the strap on the side of the tri-walker bag and wrap this around the vertical bar of the frame (fig. 7a) and again push the stud fasteners together. Fig. 7 Fig.
Fig. 8 Fig. 8a Fig. 8b NB. Wheel design may vary. CARE AND MAINTENANCE & YOUR OBLIGATION 1. 2. 3. 4. Only use your Tri-walker for the purpose for which it is intended, which is an aid to walking. It is intended that your Tri-walker is only used on standard pavements or at home and should not be used on rough terrain or pot holed surfaces. The use of you tri-walker on these surfaces can seriously compromise your safety.
Do not fit any parts or accessories to your Tri-walker manufactured by any other company. To do so will annul your warranty and, may seriously compromise your safety. 5. We suggest that you check your tri-walker visually every day. However we recommend that you should have your tri-walker serviced every three months or less if used or issued to various users. Servicing should be carried out at an approved service station or directly by Aidapt.
IMPORTANT INFORMATION The information given in this instruction booklet must not be taken as forming part of or establishing any contractual or other commitment by Aidapt Bathrooms Limited, Aidapt (Wales) Ltd or its agents or its subsidiaries and no warranty or representation concerning the information is given. Please exercise common sense and do not take any unnecessary risks when using this product; as the user you must accept liability for safety when using the product.