User's Guide

 Note: Only used approved batteries from MicroTech Medical.

 Replace the battery cover: Place the battery cover onto the back of the PDA

making sure that the edges are aligned. Press along the edges to snap the

battery cover onto the PDA. You should hear a click sound as the cover is

fastened.

 First time start up: Press and hold the power button, the PDA will vibrate,

indicating that the PDA is powered on. After about 30 seconds the Setup Wizard

will appear and guide you through entering basic settings.

Basic Settings：

 After entering the setup wizard, the first screen is the time setting. Set the

correct date and time and timezone click OK.