User's Guide

 When the sensor initialization is complete, the PDA will begin to display the

current blood sugar value.

 If the sensor has previously been implanted and connected to the signal

transmitter for a period of time, after disconnecting and reconnecting with the

signal transmitter, click the "Cancel" button when prompted by the portable

monitor to "detect the new sensor and confirm".

 At this point, the portable monitor skips initialization and starts displaying the

current blood sugar value directly.

<Note>Do not cancel the initialization process when using the new sensor.

Skipping the initialization of the new sensor may cause the system to display

incorrect glucose concentration values.</

注意>

Sensor Calibration