User's Guide

15
remove any remaining sticky residue.
 Pry the two locking arms on one side of the sensor base, push the transmitter
away from the sensor base, and then remove thetransmitter so that it can be
used again.
 The sensor is meant for one-time use only. Dispose of the used sensor according
to your local regulations.
【PDA Settings】
Target Glucose Range
You can change the thresholds for high glucose alert and low sensor
glucose alert. These settings change the normal range of sensor glucose
concentrations displayed on the home page and when high/low glucose alerts
are triggered.
 Before setting the target glucose range, please make sure that the
transmitter is connected to the sensor base, and that the PDA and
transmitter have a good wireless connection.
 Press "Settings" on the PDA’s home screen to enter the Settings Menu.；
 Press“High Glucose Threshold”to enter the desired sensor blood
glucose threshold. The threshold range is 8-25mmol/L (default value
is 12mmol/L).
 Press "Low Glucose Threshold" to enter the desired low sensor glucose
threshold. The threshold range is 2.2-5mmol/L (default value is
3.5mmol/L).