User's Guide

9
 The applicator is disposable and meant for single use only. Dispose of the used
sensor package and sensor applicator according to your local regulations.
 Follow the steps described above carefully and be sure to only use components
that are made by MicroTech Medical. Use of unapproved components can result
in injury.
【Setting up the PDA for the first time】
If you are using the PDA for the first time, the battery needs to be installed, the time
needs to be set, and the PDA should be paired to the transmitter[H2].
PDA Battery Installation:
 Remove the PDA battery cover: Holding the PDA with its back side face up, pull
the battery cover off by taking hold of the battery door from bottom slot as
shown in the picture.
 Insert the battery: Slide the battery into the battery compartment。