User's Manual

Ver:1.0.1
2. To Connect Your AL-510 via Wireless Network
Step 1: Use the Ethernet cable (Wired Network) to connect AL-510 to your computer.
Step 2: Set up a wireless network for AL-510 on Utility Demo Menu (as shown below).
➢ In the section of “Wi-Fi AP”, type in a name and a password for this wireless network.
➢ In the section of “Settings for Wi-Fi Fixed IP” – Click on “DHCP Turnoff”, and type in
accordingly, ReaderIP (10.35.2.53), ReaderPort (1001), Mask (255.255.255.0), and
Gateway (10.35.2.254).
➢ After completing these steps, click “Setting”.
3. Use AL-510 Utility Demo Menu to Read Tags
Step 1: Connect an antenna to the first port on AL-510 Reader.
Step 2: Open up AL-510 Utility Demo Menu.
➢ Type in IP (192.168.1.91 as default) and click “Connect” to connect to AL-510 Reader.
➢ Place the RFID tags within the reading range of the antenna, then click “Start” in the
section of Inventory, you will see the read tags shown on the list below.