User's Manual

Ver:1.0.1
4. Use USB Keyboard Mode to Read Tags
Step 1: Use the Ethernet cable (Wired Network) to connect AL-510 to your computer.
Step 2: Click “Keyboard” on AL-510 Utility Demo Menu, and you can configure the reading method
in Keyboard Mode.
Step 3: Connect an antenna to the first port on AL-510 Reader.
Step 4: Place the RFID tags on the antenna, then the list of read tags will appear wherever you have
your cursor at. Below uses Notebook to demo the testing results. If you would like to stop
using Keyboard Mode, please click “HID” in the section of USD Output Format.
Note: When you use Keyboard Mode to read tags, the antenna will automatically change to PORT 1.