User's Manual

5.2. Audio category

Camera# volume

Adjust sound output of registered camera

(2 way talk, lullaby and nature sound)

Low battery alert

Toggle low battery alert on/off (2 beeps)

Out of range alert

Toggle out of range alert on/off (1 beep)

Auto mute

Toggle auto mute on/off (3 sensitivity levels)

VOX

Toggle VOX on/off (3 sensitivity levels)

Camera # lullaby

Toggle lullaby on/off for registered camera

Camera # nature

sound

Toggle nature sound on/off for registered

camera

Note : After selected the option of lullaby and nature sound, press

‘Enter’ key to perform the action.

5.2.1. Auto mute

When auto mute is enabled, the camera unit starts to detect noise level.

It turns off audio completely after a 10 seconds of continuous silence.

Any noise detected afterwards will trigger the audio system back on, and

repeat the noise detection.

The pre-determined level of silence can be adjusted over sensitivity

setting. High sensitivity setting works better at silent condition. Low

sensitivity setting works better at noisy condition.

Note : When auto mute is enabled, VOX function will be disabled

automatically.