User Manual

User Manual
300Mbps WiFi Extender with New Program
2 Working Modes
This device supports: Repeater Mode, AP Mode. You just need to select one mode.
· Repeater Mode: Extend existing wifi range
· AP Mode: Create a new wifi access point for more devices
If you are not sure which mode to select, please view details on Q&A part or contact with our
professional engineers for help.
Quick Steps for Repeater Mode:
1. Plug the device into socket next to your main router, wait for 15 seconds, the wifi repeater will
start up entirely. - OK for this step?
2. Search the wifi signal named “ Wireless-N-c” and connect to it on phone. - No password
needed. Able to connect?
3. After connected to Wireless-N-c, phone will open the admin page automatically. ( If not
opened, or if using computer, please manually open a browser and type the IP address
192.168.10.1 in address bar to enter into admin page. - Could Enter?
User Name: admin
Password: admin
4. Select Repeater Mode. - Find?
5. The wifi extender will scan available wifi signals automatically. Please select the wifi signal that
you want to extend. - Find your home wifi name?
(If you want to extend a hidden network, please click Manual Setup and manually input your
hidden wifi information)
6. Please correctly input your extended-needed wifi’s password, the wifi signal that you selected
in step 5. - Very important. Please make sure you typed the password correctly.
7. (Optional) You can change or not change the wifi extender’s WiFi name and password. Click
OK to save the setting. -- (You can set a new wifi password for the wifi extender, or keep same
wifi password as main wifi signal)
8. Done. Close the browser directly. Open wifi list and search the new wifi extender’s signal,
input password to get access into internet. - Able to use the network?
If unable to use the network, the reason could be:
1. Your home original wifi doesn’t work, pls check your home wifi router to make sure it works.
2. The distance between your home router and the wifi extender is too far, please shorten the
distance between your main router and the wifi repeater, to let it pick up a better wifi signal.
3. Please do not connect this wifi repeater with your main router via any Ethernet cable.
4. Please forget/delete the new wifi signal then pls re-scan and re-connect to it to try.
5. The password was wrongly input in step 6. During the setup, you need to type your home wifi
password correctly. If password was wrong, there will be no internet.
6. Please contact with customer service if still with issues.