User Manual

❀ How to set up Router Mode:
1. Plug device into socket. Wait for about 1 minute to establish a signal till you see
the green light blinking stably.
2. Connect this device (from WAN port) with your modem or router via Ethernet
Cable. Search "Wireless-N" on your phone/laptop and connect it (No need
passwords).
3. Open you browser and type in IP address “192.168.10.253” on the address bar,
click “go”, not search, not add www.
4. Type in “admin” as the username and passwords to log in.
5. Choose “Router” Mode
6. Choose ADSL Dial-up (PPPoE), then fill out the user name and password which are
provided by your network provider.
SSID: Wireless-N, you can rename it.
Channel: Auto
Security Mode: WPA/WPA2 Mixed
Security Key: Please set your wifi password
Click "Save&Reboot "to finish.
To our honorable customers:
We provide 7/24 service support and great warranty.
If you have any questions any time, please feel free to contact us via mail
【
[e-mail] 】 and we will solve the issue for you soonest.
-- If you are satisfied with our products and service, we sincerely
welcome you to share your pleased shopping experience with other
friends;
-- If you are not satisfied with our products or service, please just let us
know and we will make a refund to you without hesitation.
Thank you!