Wifi Range Extender/Access Point/Router
Steps to set up repeater mode: 1. Plug device into wall. Wait for about 1 minute to establish a signal till you see the WLAN light blinking stably. 2. Please connect the wifi signal "Wireless-N" on your phone/laptop/computer(NOT your home existing WiFi, no need passwords) 3. Open your browser and enter 192.168.10.253 on address bar (NOT add www.) 4. Log in. Username and password are both "admin". 5. Click on "Repeater" (under Wizard) to continue. 6.
that rename the SSID 3.If you had configured it for the first time, then if you wish to reconfigure it, please reset this device by pressing the reset button for almost 10 seconds till with red power light and green WPS indicator flashes. Questions and Answers: Q: What can I do if I can't access the Internet? A: 1. Check your internet whether it's working properly by connecting a computer； 2. Please confirm you have filled out the right password, it is your home wifi password. 3.
2. The device may be out of range, please move it closer to your router 3. Please reset the Mini Router and go through the configuration again Q: How to reset this router? A: 1.While the router is power on, press the reset button till WPS light on.(The reset button is a tiny hole on the right rear panel) 2. You can check by yourself whether you have reset done. Connect the wifi "Wireless-N", if you need to fill out the password, that means reset UNSUCCESSFULLY, please try to reset again; 3.
4. Plug the extender into an electrical outlet in an elevated location and minimizing the number walls and ceilings between the router and your other devices. Setup Video Website: https://youtu.be/y3SlcAsyoGY To our customers : What We are provide is: 60-Day Money Back Guarantee and 24-Month Product Replacement Warranty. 7/24 Email Service : awanka@163.com If you have any questions any time, please feel free to contact us and we will solve the issue for you soonest.
