User Manual

2. The device may be out of range, please move it closer to your
router
3. Please reset the Mini Router and go through the configuration
again
Q: How to reset this router?
A: 1.While the router is power on, press the reset button till WPS
light on.(The reset button is a tiny
hole on the right rear panel)
2. You can check by yourself whether you have reset done. Connect
the wifi "Wireless-N", if you
need to fill out the password, that means reset UNSUCCESSFULLY,
please try to reset again;
3. If you can connect the wifi "Wireless-N" without password, that
means you have reset successfully. Please go through your re-
configuration.
Q: What can I do if my device keep disconnecting
from extender?
A: The extender is probably placed at the borderline of
the range covered by the router or access point.
1. Unplug the extender and move it to a new location
that is about halfway between your router and the
area with a poor router WiFi signal.
The location that you choose must be within the
range of your existing WiFi router network.
2. Using a smart phone to help you choose a spot
where the extender-to-router connection is optimal.
3. If there is not full WiFi signal on your smart phone ,
plug the extender into an outlet closer to the router
and try again.
Keep moving the extender to outlets closer to the
router until the full WiFi signal on smart phone.