Operation Manual

MXL

User manual

Release 1.19

2.6 – How to install and power transmitter and receiver

AIM provides a range of devices for lap time detection. MXL works with infrared

transmitter and a receiver only.

2.6.1 – Infrared transmitters

AIM lap transmitter is show here below.

The transmitter can be internally or externally powered:

• internally: with 8 AA batteries (placed in the transmitter case); when battery

charge status is low, Power led starts blinking each second (1 Hz);

• externally: with an external 12V power cable; when battery charge status is

low, Power led starts blinking each second.

The transmitter has two working mode:

• Low power mode: for tracks less than 10 m (30 ft) wide;

• High power mode: for tracks more than 10 m (30 ft) wide; in this second case

12V external power is required and both led switches on when the transmitter

is switched on.