Installation Guide
12
Function introduction-Type 112
1.Anti-splash function:
when the knob is not completely closed, it will alarm and automatically switch to self-cleaning.
2.Water temperature protection function
(1)When the water temperature exceeds 43℃, it will automatically switch to self-cleaning.
(2)At this time,it must be reconnected to the power supply to reset product.
3.Low temperature scalding protection function:
After seated by 5min, the seat temp. will automatically switch to Low temp. scalding protection
Protection functions:
Use during power failure
The water temperature and seat temperature cannot be adjusted when the power supply is cut off,
but the rinsing with normal temperature can be used.
Lighting Lighting
Water/wind temp. setting key Seat temp. setting key
Repeatedly press will switch over water
temp. in the sequence indicated in the left figure.
Change water temp. :a short sound.
Turn off water temp. :a long sound.
Change seat temp.:a short sound.
Turn off seat temp.:a long sound.
Change wind temp. :a short sound.
Turn off wind temp. :a long sound.
low : about 35℃.
high : about 38℃.
low : about 33℃ mid : about 38℃ high: about 43℃.
Repeatedly press will switch over seat
temp. in the sequence indicated in the left figure.
Repeatedly press will switch over wind
temp. in the sequence indicated in the left figure.
low: about 33℃
high: about 37℃.
TIP
LOW HIGHOFF
OFF
LOWHIGH
LOW
MID
HIGH
OFF
LOW
HIGH
(The specific temperature is slightly different
depending on the ambient temperature)
Description of function
Function setting key