Installation Guide

Manual cleaning of spray tube

- Gently pull out the nozzle and dip the

neutral detergent with a soft cloth, sponge

or small brush.

- Gently support the nozzle, wipe the

spray tube and nozzle.

Clean filter screen

- Make sure that the corner valve close and the power off before you clean the filter screen；

- Clean the filter screen when the water flow is less than normal hours.

- During cleaning process, the product must be thoroughly separated from the water inlet hose;

- Reinstall the filter screen in reverse order after cleaning.

Tips:

- Wipe the product surface with a sponge or soft cloth dampened with room temperature

water or a neutral detergent.

- Lift the upper cover and the seat ring when cleaning other parts with cleaning agents.

- Do not put cover on before the cleaning agent in the ceramic toilet is completely washed,

otherwise the surface may be corroded by the evaporation of cleaning agent.

Note: Please cut off power supply before cleaning.

Product surface cleaning

Cleaning and maintenance

Braided hose

Filter screen