Installation Guide

Product technical specification
120V~, 60Hz
1050W
1450W
About 1.1m
0.1 ~ 0.75MPa(Static pressure)
5 ~ 35℃
0 ~ 40℃
Rated voltage
Rated power
Max. transient power
Length of power line
Water supply pressure
Water supply temperature
Ambient temperature
Net weight
Water proof grade
IPX4
Cleaning
device
Warm seat
Instant heating
Anti-siphon valve & anti-backflow valve
Water amount regulation
Water temperature regulation
Heating method
Protective device
Safety device Double thermostat
thermostat & fuse
Warm wind
(Type 112)
Surface temperature
Heater power 50W
Safety device
Others
Antibacterial material Nozzle and seat
Low temperature scalding
protection
Abnormality prompt
Control operation Knob
Water temp./Seat temp./Water temp. (Type 112)Auxiliary key
Seat sense
Alarm sound
YES
YES
YES
YES
Gear 3: about 35/38℃/OFF
Gear 3: about 33/37℃/OFF
Gear 3: about 33-43℃
Stepless regulation
About 3.2kg
Massage rinse
Light control
Items Description
wind temperature
Heating wire power 180W
Safety device Thermostat + fuse
(The specific temp. is slightly different depending on the ambient temp.)
Rated power:
Under the ambient temp. of 20±5℃ and the inlet water temp. of 15±1℃, the product starts to power up and start up, and the water
temp. and setting temp. are adjusted to top grade.Turn on the hip wash function for testing (the reference flow rate is about
600ml/min).The measured product works continuously and stably Average power of cleaning cycle (3 minutes)