Installation Guide

7
Installation steps
1. It is strictly prohibited to move the product from the toilet cover,
otherwise easy to cause mechanical failure.
2. It is strictly prohibited to connect hot water above 40℃ and cold
water that may lead to icing.
Prohibition
6.Close the water valve；
7.Install braided hose；
Inoder to protect the internal circuit,be sure to turn on the
nob to make the nozzle out before plugged into power
10.Turn on the knob to check whether
the nozzle is protruding；
11.Plugged into a power supply；
Note
8.Installation tee；
tee
hose
inlet valve
hose
angle valve
2
We suggest connecting the elbow
end of the hose to the cover
9.Open the angle vavle to check
water leakage；