Information

ManualsBrandsAIM TTI ManualsLaboratory & Bench PSUsBench PSU (adjustable voltage) AimTTi 0 - 60 Vdc 0 - 20 A

A I M & T H U R L BY T H A N DA R I N S T R U M E N T S

CPX Series

Single & dual output PowerFlex dc PSUs - 360 to 840 watts

high performance autoranging outputs, up to 60V and 20A max.

true analog controls with digital functionality including S-Lock

GPIB, RS-232, USB and LAN interfaces; LXI class C compliance

isolated tracking for easy series/parallel use - up to 120V or 40A

aimtti.com

aimtti.co.uk

aimtti.us

CPX200D, CPX200DP, CPX400S, CPX400SA, CPX400SP, CPX400D, CPX400DP

Summary of content (7 pages)

PAGE 1
AIM & THURLBY THANDAR INSTRUMENTS CPX Series CPX200D, CPX200DP, CPX400S, CPX400SA, CPX400SP, CPX400D, CPX400DP Single & dual output PowerFlex dc PSUs - 360 to 840 watts high performance autoranging outputs, up to 60V and 20A max. true analog controls with digital functionality including S-Lock isolated tracking for easy series/parallel use - up to 120V or 40A GPIB, RS-232, USB and LAN interfaces; LXI class C compliance aimtti.com aimtti.co.uk | aimtti.
PAGE 2
CPX400D - Dual 420 watt PowerFlex dc power supply (840W total) View and adjust setting limits at any time. S-Lock digitally locks voltage and current settings at the touch of a button. High accuracy four digit meters have a fixed resolution for consistent readings at-aglance. DC output switches enable voltage and current to be set up before connecting the load. Range Control gives a choice of PowerFlex (60V/20A) or fixed range operation (60V/7A or 20V/20A).
PAGE 3
CPX400S - Single Output 420W              PowerFlex design gives variable voltage and current combinations within a maximum power envelope Up to 60V and up to 20A per output (420W maximum) Constant voltage or constant current operation Low output noise and good transient response PowerFlex or fixed-range operation plus custom limits True analogue controls with digital settings locking Independent outputs or isolated voltage tracking (dual) Outputs can be wired in series or parallel for 120V o
PAGE 4
Digital Interfaces Dual 180 watt PowerFlex, 60V max. and 10A max. CPX400SP, CPX400DP and CPX200DP Remote control via GPIB, RS-232, USB and LAN interfaces CPX400DP Rear Panel New CPX200D 360W dual Bench and System use The CPX400SP, CPX400DP and CPX200DP are a bus programmable version of the CPX400S, CPX400D and CPX200D respectively, and include all of their manual control features plus comprehensive digital interfaces and rear terminals.
PAGE 5
Specifications - CPX400S, CPX400SA, CPX400SP, CPX400D, CPX400DP OUTPUT SPECIFICATIONS (each output) Voltage/Current/Power Levels Voltage Range: 0V to 60V. Current Range: 0A to 20A. Note: Actual maxima for voltage and current are typically 1% greater than the figures given above. Power Range: Up to 420W subject to power envelope. ANALOGUE REMOTE INTERFACE (CPX400SA only) The CPX400SA offers galvanically isolated analogue remote control of voltage and current from control voltages.
PAGE 6
Specifications - CPX200D & CPX200DP OUTPUT SPECIFICATIONS (each output) Voltage/Current/Power Levels Voltage Range: 0V to 60V. Current Range: 0A to 10A. Note: Actual maxima for voltage and current are typically 1% greater than the figures given above. Power Range: Up to 180W subject to power envelope. POWER ENVELOPE The maximum current at any voltage settings is limited by the power envelope which is set to give 3A at 60V rising to 10A at 16V under all ac supply conditions (both outputs loaded).
PAGE 7
Model Range Model Table Model Outputs Total Power Max Volts Max Amps Interfaces CPX200D 2 360 watts 60V 10A CPX200DP 2 360 watts 60V 10A •* CPX400S 1 420 watts 60V 20A CPX400SA 1 420 watts 60V 20A •** CPX400SP 1 420 watts 60V 20A •* CPX400D 2 840 watts 60V 20A CPX400DP 2 840 watts 60V 20A •* * Digital interfaces only; ** Analog interface only Laboratory power supply series from Aim-TTi Interfaces Table Model Isolated Analog CPX200D CPX200DP CPX400S CPX400SA • CPX400SP CPX400D CPX400DP PLH & PLH-P series