Datasheet

ManualsBrandsAim-TTi ManualsBench Power SuppliesBench Top Power Supply, 60V, 20A, 420W, Programmable

T H U R L B Y T H A N D A R I N S T R U M E N T S

CPX400 Series

Single & dual output PowerFlex dc PSUs - 420 watts per output

high performance autoranging outputs, 60V and 20A maximum

true analog controls with digital functionality including S-Lock

GPIB, RS-232, USB and LAN interfaces; LXI class C compliance

tti-test.com

isolated tracking for easy series/parallel use - up to 120V or 40A

aimtti.com

ttid.co.uk

aimtti.us

Summary of content (5 pages)

PAGE 1
THURLBY THANDAR INSTRUMENTS CPX400 Series Single & dual output PowerFlex dc PSUs - 420 watts per output high performance autoranging outputs, 60V and 20A maximum true analog controls with digital functionality including S-Lock isolated tracking for easy series/parallel use - up to 120V or 40A GPIB, RS-232, USB and LAN interfaces; LXI class C compliance tti-test.com aimtti.com | ttid.co.uk | aimtti.
PAGE 2
CPX400D - Dual 420 watt PowerFlex dc power supply (840W total) View and adjust setting limits at any time. High accuracy four digit meters have a fixed resolution for consistent readings at-aglance. Range Control gives a choice of PowerFlex (60V/20A) or fixed range operation (60V/7A or 20V/20A). True analog controls make adjustment quick and simple. Voltage sensing can be changed between local and remote at the flick of a switch.
PAGE 3
New CPX400S - Single Output 420W              PowerFlex design gives variable voltage and current combinations within a maximum power envelope Up to 60V and up to 20A per output (420W maximum) Constant voltage or constant current operation Low output noise and good transient response PowerFlex or fixed-range operation plus custom limits True analogue controls with digital settings locking Independent outputs or isolated voltage tracking (dual) Outputs can be wired in series or parallel for 12
PAGE 4
Specifications CPX400SP and CPX400DP Remote control via GPIB, RS-232, USB and LAN interfaces OUTPUT SPECIFICATIONS (each output) CPX400DP Rear Panel Voltage/Current/Power Levels Voltage Range: 0V to 60V. Current Range: 0A to 20A. Note: Actual maxima for voltage and current are typically 1% greater than the figures given above. Power Range: Up to 420W subject to power envelope.
PAGE 5
Specifications (Continued) ANALOGUE REMOTE INTERFACE (CPX400SA only) The CPX400SA offers galvanically isolated analogue remote control of voltage and current from control voltages. Voltage and current front panel settings generate non-isolated analogue output voltages that can be used to control slave power supplies. Input Scaling: Input Accuracy: Output Scaling: Output Accuracy: Remote On/Off: 0 to 100% control of voltage or current from 0 to 5V or 0 to 10V (selectable) Voltage: 0.3% ±20mV. Current: 0.