User Manual

INPUT SPECIFICATIONS
Input A
Input Impedance:
1MΩ//20pF (AC coupled)
Frequency Range: <3Hz to >125MHz
Sensitivity: Sinewave - 15mVrms 10Hz to 125MHz
Input B
Input Impedance:
50Ω nominal (AC coupled)
Frequency Range: <80MHz to >3GHz
Sensitivity: Sinewave - 12mVrms 80MHz to 2GHz, 25mVrms to 2.5GHz,
50mVrms to 3GHz
Maximum Input Voltage
Input A and Input B:
30Vdc; 30V rms 50/60Hz with respect to ground
, reducing
to 1Vrms above 1MHz
Note that the inputs will not be damaged if subjected to an accidental short-term connection to a
50/60Hz line voltage not exceeding 250V rms.
POWER REQUIREMENTS
Battery Type: 9V PP3 alkaline
Battery Life: Typically 20 hours
Low Battery Indicator: ‘Bat' shows in display when approximately 10% of battery life
remains.
GENERAL
Display: 8½ digit LCD,
11.5mm high (0.45”);
15 annunciators show measurement units, input, mode and
time.
Operating Range: +5°C to +40°C, 20% to 80% RH
Storage Range:
–20°C to +60°C
Environmental: Indoor use at altitudes up to 2000m Pollution Degree 2
Size: 81mm x 178mm x 30mm (WxLxD)
Weight: 190gms excluding battery
Electrical Safety: Complies with EN61010-1
EMC: Complies with EN61326
3