THURLBY THANDAR INSTRUMENTS New PL & New PL-P Series New PL Series - advanced linear regulated laboratory power supplies true analog controls with digital functionality New PL-P Series - full remote control for bench & system applications analog, RS-232, USB, LAN (LXI) or GPIB interfaces tti-test.
New PL series - advanced linear regulated laboratory power supplies New PL Series Analog control for a digital world Building on the success of a winning formula In the 1980s the original PL series transformed customer expectations of the bench power supply and set a format that has been extensively copied by other manufacturers. Over the years, the PL series has been steadily revised and extended.
New PL series - ultra compact using minimum bench or rack space Ultra-compact design with higher power efficiency and near-silent cooling The New PL series achieves an exceptional power density for a linear regulated power supply by offering up to 90 watts from a ¼ rack 3U sized casing. This gives it an unusually small bench footprint taking up less space on a crowded bench. For rack-mount application, up to four units can be mounted into a single slot.
Dual Output model - PL303QMD (quad-mode dual) Compact Dimensions Four Modes of Operation The PL303QMD is a dual output power supply with the same high power density as the single output models - 180 watts from a half rack 3U sized casing (214mm x 131mm). The PL303QMD is more than just two PL303 single power supplies in one box. It has four modes of operation: Independent, Isolated Tracking, Isolated Ratio Tracking, and True Parallel.
New PL-P Series - comprehensive remote control facilities New PL-P Series Interfacing to every application Bench and System use The New PL-P series includes all of the manual control features of the New PL series, but adds comprehensive remote control facilities. The ultra-compact rack-modular sizing makes it ideally suited to rack mounted system applications, while its user-friendly manual controls are retained for bench top applications.
New PL series - Technical Specifications MODEL RANGE: PL155 PL303 PL601 PL303QMD Note: 120V and 250V models are 0 to 15V at 0 to 5A planned, please check our web site 0 to 30V at 0 to 3A for fully up to date information. 0 to 60V at 0 to 1.5A 2 x (0 to 30V at 0 to 3A), or 1 x (0 to 30V at 0 to 6A) OUTPUT SPECIFICATIONS Voltage/Current Levels PL155 PL303 PL601 PL303QMD 0V to 15V/0.1mA to 5A (75W max.) 0V to 30V/0.1mA to 3A (90W max.) 0V to 60V/0.1mA to 1·5A ( 90W max.) Dual outputs of 0V to 30V/0.
New PL-P series - Additional Technical Specifications REMOTE ANALOG ON/OFF CONTROL (single output models only) MODEL RANGE General New PL-P series units offer remote control and read-back using analog, RS232, USB, LAN (LXI) interfaces. They retain all of the capabilities of the New PL Series when under manual control. All of the specifications from the previous page therefore apply to the equivalent models in the New PL-P series. The following specifications are additional.
