Instructions

Operations on set-up files
124 TGF4000 Series Instruction Manual
There are nine local set-up stores numbered 1 to 9. The number is shown next to the filename
in the Local: Box. Initially the files will all be empty. The file names are SETUP1 to SETUP9 by
default but they may be changed as they are used.
There are four operations available for set-up files as shown by the soft-key labels Copy, Save,
Recall and Delete.
The copy operation will not be available if no flash drive is attached.
Copy
The copy operation allows set-up files to be copied between local storage and an attached USB
flash drive.
To copy a file from local to disk:
1. Select the Local: Box by pressing the Source soft-key.
2. Select the file to be copied using the KNOB.
3. Press the Copy soft-key.
4. Optionally modify the name of the file to receive the copy. This will default to the
name of the file selected in step 2 above if it is not modified.
The screen below shows an example after performing the above actions. Here the file in store
3 will be saved to a set-up file on disk. The name will be SETUP3 unless it is changed.
Copy from: shows that the source is Local.
Copy to: shows that the destination is Disk.
Local shows the file that will be written to Disk.
Disk and the Edit Box show the name of the file that will be written, the file name can be
edited using the KNOB and cursor keys.