E D I N TH E Measurably better value U FA CTU TH MAN EU K UK DE SI GN N RED I Sine frequency up to 240MHz with 1µHz resolution Up to 100MHz high resolution pulse generator Arbitrary waveforms up to 16bits at 800MSa/s Wideband noise generator TGF4000 SERIES 40MHz, 80MHz, 160MHz & 240MHz Dual Channel Arbitrary Function Generators aimtti.com | aimtti.
EXTENSIVE FEATURES Sine frequency up to 240MHz high sine purity, THD <0.
FEATURES SUMMARY ff 0.001mHz to 240MHz (TGF4242), 160MHz (TGF4162) , 80MHz (TGF4082) or 40MHz (TGF4042) sine frequency range ff High sine wave purity with low phase noise and jitter, audio band THD down to 0.05% ff Square waves up to 100MHz with variable duty cycle, edge speeds down to 3ns ff Resolution of up to 15 digits or 1µHz, high stability TCXO timebase ff Two identical channels - independent or linked with coupled and tracking modes ff Inter-channel phase offset of -3600 to +3600 with 0.
EXCEPTIONAL PERFORMANCE MODEL COMPARISON TGF4042 TGF4082 TGF4162 TGF4242 No.
EXTENSIVE DIGITAL & ANALOG MODULATIONS A large set of modulation types are built-in including AM, FM, PM, FSK, ASK, BPSK, PWM and SUM. All standard and arbitrary waveforms can be modulated as the carrier, although Noise, Pulse and PRBS are limited to AM, ASK and SUM modulations plus PWM for Pulse. INTERNAL DIGITAL MODULATIONS AM, FM, PM, PWM and SUM modulations can use an internal modulation source based upon any standard or arbitrary waveform type or Noise.
EFFICIENT WORKING GRAPHIC USER INTERFACE (GUI) The TGF4000 series is equipped with a 4.3 inch high resolution colour screen, providing added efficiency and clarity when carrying out complex testing. The graphic display demonstrates a quick visual insight into the waveform through the specifically colour coded graph, ensuring accurate and reliable results. Graphs for both channels can be displayed side by side for easy comparison or alongside a detailed description of the settings selected.
TWO CHANNEL OPERATION The two channels are identical with no performance limitations giving maximum flexibility and value for money. ff INDEPENDENT CHANNEL OPERATION The two channels can be operated completely independently as if they were two separate generators. (Note that external trigger and external modulation inputs are shared). ff RELATIVE PHASE The relative phase can be set from -360 degrees to +360 degrees with 0.001o resolution.
ENHANCED CONNECTIVITY FULL REMOTE CONTROL GPIB (OPTIONAL) WEB INTERFACE All functions of the generators can be controlled from the digital interfaces. Arbitrary waveform data can also be loaded using these interfaces. The GPIB interface is compliant with IEEE-488.1 and IEEE-488.2. GPIB remains a widely used interface for system applications.
FREQUENCY REFERENCE SYNC OUTPUT The generators use a high quality TCXO crystal as the internal frequency reference providing 1ppm accuracy and stability. If a higher accuracy or stability is required, an external 10MHz reference signal (from an off-air standard for example) can be applied to the Ref. Clock input. The internal 10MHz clock is available as a rear panel output for synchronisation with external equipment. Channel 2 can be configured to be a Sync output for channel 1.
TECHNICAL SPECIFICATIONS MODEL: TGF4042 TGF4082 TGF4162 TGF4242 WAVEFORMS: Standard waveforms: Sine, Square, Ramp (Variable Symmetry), Triangle (50% Ramp symmetry), Positive Ramp (100% Ramp symmetry), Negative Ramp (0% Ramp symmetry), Pulse, Noise (Gaussian), DC, Sin(x)/x, Exponential Rise, Exponential Fall, Logarithmic Rise, Logarithmic Fall, Haversine, Cardiac, Gaussian, Lorentz, D-Lorentz and 4 User Defined Arbitrary Waveforms.
MODEL: TGF4042 TGF4082 TGF4162 TGF4242 PULSE: Frequency range: 1mHz to 25MHz 1mHz to 100MHz Frequency resolution: 1mHz, 11 digits 1mHz, 12 digits Output level (into 50Ω) : ≤50MHz ≤ 100MHz 10mVp-p to 10Vp-p Aberrations (typical) : ±5% of amplitude (for transition time 10ns) ±3% of amplitude (for transition time 20ns) <±2% of amplitude (for transition time >40ns) Jitter (RMS) : <30ps (cycle to cycle) Range: ≤ 4Vp-p Rise and fall times: Range: > 4Vp-p 10mVp-p to 10Vp-p 10mVp-p to 4Vp-p ±5%
MODEL: TGF4042 TGF4082 TGF4162 TGF4242 PBRS: (ONLY AVAILABLE IN TGF4162 & TGF4242) Bit rate: - 1µbps to 100Mbps, 1µbps resolution Sequence lengh: - 2M - where M = 7, 9, 11, 15, 20, 23, 29 or 31 Rise and fall times (typical): - 5ns fixed Output level (into 50Ω) : - 10mVp-p to 10Vp-p HARMONIC OUTPUT: (ONLY AVAILABLE IN TGF4162 & TGF4242) Harmonic waveforms can be defined and stored in user-defined arbitrary waveform locations.
MODEL: TGF4042 TGF4082 TGF4162 TGF4242 ASK (AMPLITUDE SHIFT KEYING): Carrier Waveforms: Sine, Square, Ramp, Pulse, Noise, Arb - PBRS Maximum Carrier Frequency: 25MHz, subject to carrier waveform. 50MHz, subject to carrier waveform.
MODEL: TGF4042 TGF4082 TGF4162 TGF4242 GATED: Waveform will run while the Gate signal is true and stop while false. Carrier Waveforms: - PRBS 25MHz, subject to carrier waveform. 50MHz, subject to carrier waveform. Internal 2mHz to 25MHz 2mHz to 50MHz External DC to 1MHz Internal From keyboard or trigger generator. External.
MODEL: TGF4042 TGF4082 TGF4162 TGF4242 EXTERNAL FREQUENCY MEASUREMENT: Function: Frequency Range: Source: Frequency, Period, Positive Width, Negative Width, Duty Cycle AC coupled 3Hz to >125MHz DC coupled 100mHz to >125MHz AC coupled REF / COUNT (AC) IN DC coupled TRIG / COUNT (DC) IN Frequency Resolution: Up to 7 digits displayed. Measurement Time: Automatic AC coupled ≤50MHz - 100mVpp - 5Vpp >50MHz - 250mVpp - 5Vpp Maximum input ±10V DC coupled Threshold typically 1.
MODEL: TGF4042 TGF4082 TGF4162 TGF4242 SYNC OUTPUT: Channel 2 can be configured to output Channel 1 sync from its MAIN OUT 2 socket. Sync is a multi function output which is automatically selected to be any of the following. Alternatively, the user can choose Sync to always be carrier referenced, to output the currently used trigger signal or turn it off. Carrier Waveform Sync: Modualtion sync: Sine Square Ramp Pulse Arbs ≤ 62.5MHz - A square wave with 50% duty cycle at the waveform frequency.
MODEL: TGF4042 TGF4082 TGF4162 TGF4242 REF CLOCK / COUNT (AC) INPUT: Input for an external 10MHz reference clock and AC coupled external frequency measurement. Voltage Range: ≤50MHz - 100mVpp – 5Vpp >50MHz - 250mVpp – 5Vpp Maximum Voltage: +10V Minimum Voltage: -10V INTERFACES: Full digital remote control facilities are available through LAN, USB and optional GPIB interfaces. LAN Interface Ethernet 100/10base – T hardware connection. 1.
Measurably better value WAVEFORM GENERATOR RANGE TG300 SERIES TG1006 TG1000 & 2000 SERIES TGXX11/12A 3MHz 10MHz 10MHz / 20MHz 25MHz / 50MHz FUNCTION FUNCTION FUNCTION FUNCTION / PULSE / ARB ANALOG DDS DDS DDS - 125MS/s fixed 1 CHANNEL 1 CHANNEL 1 CHANNEL 1 & 2 CHANNEL - - USB & RS232 USB, LAN & GPIB* TGF3000 SERIES TGP110 TGP3100 SERIES TGA1240 SERIES 80MHZ/160MHZ 10MHz 25MHz / 50MHz 16MHz FUNCTION/ PULSE/ ARB PULSE PULSE/ FUNCTION/ ARB TRUE ARB - 40MS/s max.
OTHER RANGES AVAILABLE POWER SUPPLIES & LOADS LINEAR POWER SUPPLIES MIXED-MODE POWER SUPPLIES POWERFLEX POWER SUPPLIES ELECTRONIC DC LOADS � 30w to 1200w Single and Multi channel PSUs for bench-top or remote control and system use. � Flexible electronic DC loads for general purpose applications. RF & EMC TEST EQUIPMENT SIGNAL GENERATORS HARMONICS ANALYSERS SPECTRUM ANALYSERS LOW-DISTORTION SOURCE � RF signal generators with frequency capability up to 6GHz.
EXCELLENCE THROUGH EXPERIENCE Aim-TTi is the trading name of Thurlby Thandar Instruments Ltd. (TTi), one of Europe’s leading manufacturers of test and measurement instruments. The company has wide experience in the design and manufacture of advanced test instruments and power supplies built up over more than thirty years. The company is based in the United Kingdom, and all products are built at the main facility in Huntingdon, close to the famous university city of Cambridge.