U S E R M A N UA L 9 FIN OIL HEATER 2000 W • 3 Heat SettingS (800 W / 1200 W / 2000 W) • Large Heating Surface • adjuStabLe tHermoStat • tHermaL cut off • overHeat Protection • cord Storage faciLity • Safety tiP-over SWitcH
INDEX • IMPORTANT SAFEGUARDS 3 • KNOW YOUR OIL HEATER 5 • ASSEMBLY INSTRUCTIONS 6 • USAGE INSTRUCTIONS 7 • CONFORMITY WITH DIRECTIVES 8 • ENVIRONMENT FRIENDLY DISPOSAL 8 • 2 YEAR LIMITED WARRANTY 9 • REPAIRS PROCEDURE 10
USER INSTRUCTIONS Please read this instruction manual carefully before using for the first time and always keep these instructions. IMPORTANT SAFEGUARDS When using the Oil Heater, basic safety precautions should always be followed including the following: 1.
IMPORTANT SAFEGUARDS - CONTINUED 11. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person to avoid a hazard. 12. Avoid the use of an extension cord as this may overheat and cause a risk of fire. 13. Do not use on soft surfaces, like a bed, where openings may become blocked. Use the heater on flat, dry surfaces only. 14. Do not place this heater near flammable materials, surfaces or substances, as there may be a risk of fire.
KNOW YOUR OIL HEATER 1 2 5 3 4 6 1. Carry handle 4. Cord storage 2. Thermostat knob 5. Radiant fins 3. Power switch 6.
ASSEMBLY INSTRUCTIONS The heater is packaged with the feet unattached. You must attach them before operating the heater. WARNING: DO NOT operate without feet attached. Only operate the heater in the upright position (feet on the bottom, controls on the top), any other position could create a hazardous situation. 1. Place the radiator body upside-down on a scratch-free location, make sure it is stable and will not fall. 2.
USAGE INSTRUCTIONS 1. Before using the heater, make sure that it is on a flat and stable surface. Damage may occur if it is placed on an incline or decline. 2. Set all the controls to OFF position and insert the plug into a socketoutlet that is grounded. Be sure that plug fits firmly. 3. Rotate the thermostat knob clockwise to MAX position and switch the heater on as follow: the switch I for low heat, the switch II for medium heat and both switches on for high heat. 4.
CONFORMITY WITH DIRECTIVES This product is CE marked to denote conformity with Directives 2006/95/EC (Low Voltage) and the EMC directive (2004/108/EC), as amended. ENVIRONMENT FRIENDLY DISPOSAL You can help protect the environment! Please remember to respect the local regulations: hand in the non-working electrical equipment to an appropriate waste disposal centre.
2 YEAR LIMITED WARRANTY The Manufacturer hereby provides a warranty to the original purchaser of this product (‘the consumer’) that this product will be free of manufacturing defects in materials and workmanship which under normal, personal, family or household use (commercial use expressly excluded) manifest themselves within the 2 year from the date of purchase.
REPAIRS PROCEDURE Should you experience any faults on your Aim product, please adhere to the following procedure to have the fault rectified speedily and professionally. You can return the product to the store. Call the Pick n Pay CUSTOMER CARE number on 0860 30 30 30 (only in South Africa) to report the fault and make arrangements for the next steps. Note: Should you live in an outlying area or outside South Africa, it may be necessary to return the product to the store nearest to you.
MODEL NUMBERS: AOH9S 11 |