U S E R M A N UA L INTELLI SET ALARM CLOCK RADIO WITH WIRELESS AND USB CHARGE PAD • BLUETOOTH • USB FOR CHARGE • WIRELESS CHARGE • MULTI ALARM 1
INDEX • OPERATING INSTRUCTIONS 3 • FRONT DISPLAY INTERFACE 8 • BACK DISPLAY INTERFACE 9 • 1 YEAR LIMITED WARRANTY 10 • REPAIRS PROCEDURE 11
USER INSTRUCTIONS Please read this instruction manual carefully before using for the first time and always keep these instructions. OPERATING INSTRUCTIONS BOOT: 1. After unpacking and accessing (output is QC3.0 quick charge DC 5V 3A, 9V 2A, 12V 1.5a) adapter, long press the power button to enter the startup program. At this point, the LED on the front display interface is all lit for 5 seconds for self-check, so as to ensure the normal use of the display screen.
OPERATING INSTRUCTIONS - CONTINUED 3. Alarm type selection: This machine preset has 5 kinds of chord sound alarm and timing FM function (alarm 6) to choose from, through the “+” or “-” key in order or reverse order to choose, when the selection of the corresponding ringtone horn will have a pre-listening effect, the default program is 01. Select OK and press M to enter the next setting. 4. Alarm ON/OFF: “ON” or “OFF” of the alarm can be selected by “+” or “-” key.
OPERATING INSTRUCTIONS - CONTINUED FM PLAYING FUNCTION AND TIMING FM PLAYING FUNCTION: (during playing FM, please use the MIC charging cable of the machine to connect to the USB interface) 1.
OPERATING INSTRUCTIONS - CONTINUED WIRELESS CHARGING FUNCTION SETTING: 1. When the wireless charging of the machine works normally, the power supply supplies the external power supply. Please use the adapter with output QC3.0 quick charging (DC 5V 3A,9V 2A, 12V 1.5a) to power the type-c interface of the machine. 2. When charging wireless power, the power cord must be the standard type-c charging cable (DC 5V 2A) of the machine, otherwise the charging effect of wireless charging will be affected. 3.
OPERATING INSTRUCTIONS - CONTINUED LOCAL INFORMATION: 1. Product specification: 137*131.5*93 mm 2. Product material: ABS shell material + hd PC display lens +EVA non-slip pad + high-elastic wear-resistant cloth net 3. Display size: 5 “LED display clock alarm clock 4. No charging power: DC 5-9v / 850-1000mah for single wireless 5. 6. 7. 8. 9.
FRONT DISPLAY INTERFACE 1 2 1. 2. | 8 Top wireless charging area. Wireless traffic light indicator hole.
BACK DISPLAY INTERFACE 1 2 3 1. 2. 3. 4. 5. 6. 7. 8. 4 5 6 7 8 Charging light hole. Short press when alarm: enter snooze mode for 5 minutes. Other modes short press: cycle adjust light brightness. Type-c charging port. The FM mode Short press: next channel long press: increase volume. Clock mode short press: add one long press: increment. The FM mode short press: last channel long press: to reduce the volume. Clock mode short press: minus one long press: decreasing Long press: enter/exit FM mode.
1 YEAR LIMITED WARRANTY The Manufacturer hereby provides a warranty to the original purchaser of this product (the consumer) that this product will be free of manufacturing defects in materials and workmanship which under normal, personal, family or household use (commercial use expressly excluded) manifest themselves within the 1 year from the date of purchase.
REPAIRS PROCEDURE Should you experience any faults on your Aim product, please adhere to the following procedure to have the fault rectified speedily and professionally. You can return the product to the store. Call the Pick n Pay CUSTOMER CARE number on 0860 30 30 30 (only in South Africa) to report the fault and make arrangements for the next steps. Note: Should you live in an outlying area or outside South Africa, it may be necessary to return the product to the store nearest to you.
