User Manual

| 6
WIRELESS CHARGING FUNCTION SETTING:
1. When the wireless charging of the machine works normally, the power
supply supplies the external power supply. Please use the adapter with
output QC3.0 quick charging (DC 5V 3A,9V 2A, 12V 1.5a) to power
the type-c interface of the machine.
2. When charging wireless power, the power cord must be the standard
type-c charging cable (DC 5V 2A) of the machine, otherwise the
charging effect of wireless charging will be affected.
3. After the external power supply is successful, the device with wireless
charging function (such as mobile phone) shall be placed on the center
area of the wireless charging transmitter (net cloth) at the top of the
machine smoothly, so as to ensure the good docking between the
wireless charging transmitter and the receiver
4. Connect to the standard type-c charging line of the machine, and when
waiting for charging, there will be a red light on the upper right corner
of the cloth, a green light will be on when charging, and the green light
will remind you to re-access the type-c charging line.
5. When wireless charging works, the output power of DC 5V can be
provided for the USB interface of the machine at the same time, which
can be used for charging mobile devices without wireless
charging function.
LOCAL WARNING:
1. If the machine is not used for a long time, please press the power button
to enter the background operation mode to ensure the normal service
life of the product.
2. Matters needing attention when the machine is used or used: anti-
insolation, anti-moisture, anti-corrosion, anti-drop, anti-pressure.
3. Automatic repair function of the machine software: in the process of
use, if abnormal operation mode or operation jam occurs (the machine
freezes), please long press the power button for about 8 seconds (at this
time, the power cannot be disconnected), the machine will automatically
enter the program repair mode until the normal boot.
OPERATING INSTRUCTIONS - CONTINUED