Owner manual

LCU-ONE CAN connected to MyChron4

User Manual

Release 1.04

Chapter 3 – Connection with MyChron4

+ ─

Connecting Lambda controller to MyChron4, the system automatically switches on and

recognises the peripheral at start up.

Warning: connect LCU-ONE CAN to MyChron4 OFF.

In the figure above, LCU-ONE CAN controller is connected to MyChron4 through Data

Hub, the CAN connections multiplier.

In case the only available peripheral is LCU-ONE CAN, it can be connected directly to

MyChron4 through the back connector labelled as EXP/PC.

Though the system is powered through Lambda controller connected to the battery, it is

suggested to leave in MyChron 4 and in the possible eBox the related internal

batteries.

Lambda controller switches automatically off when MyChron4 is switched off.