Owner manual

LCU-ONE CAN connected to MyChron4

User Manual

Release 1.04

Chapter 4 – Configuration on MyChron4

The only configuration needed to better use MyChron4 is choosing the temperature

channel shown together with LAMBDA value.

Press Menu button selecting Configuration icon:

Afterwards select temperatures setup icon:

This window appears:

Using left buttons (“UP”/”DOWN”) select “Temp with Lambda” row.

Pressing “ENTER” the desired input is set.

Available options are:

• M4 T1: MyChron4 Temperature;

• M4 T2: MyChron4 2

Temperature (only 2T version);

• eBoxT1: eBox 1

Temperature (assuming this peripheral is connected);

• eBoxT2: eBox 2

Temperature (assuming this peripheral is connected);