AiM User Guide Microtec M222 Release 1.
This user guide explains how to connect Microtec M222 ECU to AiM SoloDL. It is an aftermarket product installed on Honda bikes only. Please refer to Microtec website “www.microtec.cc” to know supported bike models. 1 Installation notes To install SoloDL on your bike you can use a bar pad.
Microtec M222 ECU can be connected to SoloDL using an interface cable shown here below. Its part number is: V02569260. M222 ECU is placed under the bike seat and has a connector used to communicate data to an external device. Make it pass along the side of the bike and plug it to AiM cable. Please note: Microtec ECU powers SoloDL. It is thereby unnecessary to check SoloDL battery status.
In case Microtec ECU is already connected to an external device it is possible to maintain this connection using AiM cable. As explained in the drawing below, M222 ECU can be connected to AiM cable male connector labelled “To the ECU” and the third device can be connected to the ECU through AiM cable female connector labelled “To other devices”. ECU connector has a cap on it.
3 SoloDL configuration Before connecting SoloDL to the ECU, set it up using Race Studio 2 software. Run the software and press “Device Configuration” on the software left keyboard: select “SoloDL” in the panel that shows up as here below.
The software shows SoloDL configuration page: press “Configuration Manager” and select the configuration you want to use or press “New” to create a new one. In this second case “New configuration” panel appears: select ECU Manufacturer “Microtec” and ECU Model “M222” as here below. Confirm pressing “OK” in both panels and transmit the configuration to SoloDL pressing “Transmit” as here below.
4 Microtec “M222” protocol Channels received by SoloDL connected to Microtec M222 protocol are: ID CHANNEL NAME FUNCTION ECU_1 ECU_2 ECU_3 ECU_4 ECU_5 ECU_6 ECU_7 ECU_8 ECU_9 ECU_10 ECU_11 ECU_12 ECU_13 ECU_14 ECU_15 ECU_16 ECU_17 ECU_18 ECU_19 ECU_20 ECU_21 ECU_22 ECU_23 ECU_24 ECU_25 ECU_26 ECU_27 ECU_28 MT_RPM MT_ENG_ACC MT_TPS MT_DEV_TPS MT_ECT MT_TAIR MT_BARO MT_MAP MT_BATT MT_GEAR MT_LAMBDA MT_MAP_INDEX MT_INJ_PHASE MT_INJ_TIME MT_INJ_BASE MT_ING_ADV MT_ING_BASE MT_COR_INJ_H2O MT_COR_INJ_AIR MT_C
