User Manual

MyTach – User Manual
Release 1.04
5.1.5.2 – Select Target
To set Target:
• Select “Target”
• Press “START/stop”
• Set threshold alert value using
“Arrow” buttons to increase/ decrease
digit value.
• Select Unit pressing “START/stop”
• Press “GPS on-off” to quit
5.1.5.3 – Select Work Range
To set Work Range :
www.aim-sportline.com/mytach
19
• Select “Work Range”
• Press “START/stop”
• Press “Arrow” buttons to increase or
decrease digits.
• Press “GPS on-off” to quit
For example:
Fixed target: 10,2 Km/h
Range:12%
Alarm beeps when < 8,9 Km/h
Alarm beeps when > 11,4 Km/h
Alarm beeps when the gap goes 12% over the selected target.
Note: range can be positive or negative and work range function is available onl y for
speed measure.