User Manual

Aimetis People Counter 2.1
Installation Aimetis People Counter 2.1
2
Installation
Procedure
To install the Aimetis People Counter on your camera:
1. Browse to https://www.aimetis.com/xnet
2. Log in to your Aimetis Xnet account. If you do not have an account, create one before
continuing.
3. Within the Aimetis Xnet, click on the
Downloads tab.
4. Click
Aimetis People Counter on the left. You will see a list of downloads for the Aimetis
People Counter.
5. Download the file ending in
eap . This is the installation package.
6. Connect to your camera using your Web browser.
7. Click
Setup , and then Applications .
8. Click
Browse and select the file you saved from AIMETIS.
9. Click
Upload Package . The application appears in the list.
10. Under
Installed Applications , select Aimetis People Counter.
11. Click Start . In the left pane, under Applications , click Aimetis . The Application Settings:
Aimetis People Counter
page opens. Click Main Page .
Important: Aimetis People Counter 2.1 is compatible only with Axis
cameras based on the
ARTPEC-4 CPU (chip) and that support ACAP
(AXIS Camera Application Platform).
Aimetis People Counter
2.0 is compatible only with Axis cameras
based on the
ARTPEC-3 CPU (chip) and that support ACAP (AXIS
Camera Application Platform).
Note: If the computer you are using to access the internet does not have
access to your AXIS camera, switch to a computer that does before
continuing. Transfer the installation package to this computer.