User Manual
Aimetis People Counter 2.1
How to Use the Aimetis People Counter Interface Aimetis People Counter 2.1
12
Table 2.
Tab/button Description and usage
Dashboard
Displays counter data in graphical form for the last hour, last day, and last week.
If you hover your mouse on the graph, specific
In
and
Out
and
Time
statistics
are displayed.
No data
(grey box) indicates that the application was not run for that period.
Zero counts
indicates that the application was running but no people crossed
the counting line
Staffing
Displays counter data for the last week. For example, in a store setting,
determine when more staffing might be required.
No data
(grey box) indicates that the application was not run for that period.
Zero counts
indicates that the application was running but no people crossed
the counting line.
Reports
Generate a report (
Table
or
Chart
form) based on minutes, hours, days, or
months, for a specific period (
From
and
To
dates using a calendar). For details,
see
“How to Generate Reports” on page 15
.
Live View
Displays live camera feed with ongoing count updates.
• In some cases, you can use the ongoing
In
and
Out
counts to determine the
counting accuracy. For example, if the camera is setup overhead the only
entrance used by customers, then the difference between the two amounts (
In
and
Out
), divided by the higher count, tells you the precision of counts. Using
the example below (Out 956 - In 948)= 8 missed counts out of 956.
(8/956=.0083) is less than 1% missed counts.
• Clicking
Reset Count
is like resetting the trip odometer in a car. The total
tracked mileage is NOT reset to 0, just the instance of the trip. Clicking
Reset
Count
sets the displayed values of the current counts in the
Live View
and
Setup
tabs. Historical data is not changed when the counts are reset.
Setup
Where your setup up the
Person Size
, position the counting line, and tune the
application for higher accuracy.
Help
Provides basic information about the application environment where Internet is
not available.
Save
button Save your setup settings.