User's Manual
7
adjustment screw (5) counter clockwise.
• To move the point of impact to the left, turn windage
adjustment screw (5) clockwise.
f Elevation adjustments (See Fig. 5)
• To move the point of impact up, turn elevation adjust-
ment screw (4) counter clockwise.
• To move the point of impact down, turn elevation
adjustment screw (4) clockwise.
NOTE: Each click of the adjustment screws (4) (5) cor-
responds to a 13 mm movement of the point of impact
at 100 meters, (3 mm at 25 meters and 26 mm at 200
meters or 0.5 in at 100 yds).
g Conrm zeroing by ring at least three shots at a zeroing
target. Check points of impact to conrm accuracy and
repeat above procedure if required.
h After initial ring, ensure that the sight is securely
installed on the weapon.