User's Manual

Aimpoint AB
Jägershillgatan 15
SE- 213 75 Malmö, Sweden
Phone [phone]
Fax [phone]
e-mail: [e-mail]
www.aimpoint.com
Aimpoint Inc.
14103 Mariah Court
Chantilly, VA 20151-2113, USA
Phone [phone]
Fax [phone]
e-mail: [e-mail]
www.aimpoint.com
© Copyright 2010. Contents property of Aimpoint.
All rights reserved. [12810-1]
User Manual for
Mounting Adapter 30mm/34mm
with Picatinny Rail
ASSEMBLING THE MOUNTING ADAPTER
ONTO THE MAGNIFYING SCOPE
1. Open the ring halves (1) and (2) of the
mounting adapter.
2. Position the ring halves on the magnifying
scope.
3. Use an Allen Wrench 3/32” to tighten
the screws (3). Tighten the ring screws
lightly so that the mounting adapter can be
rotated and slide to its position.
4. Tighten the ring screws (3) equally so
space between the top (1) and bottom (2)
halves is uniform.
5. Put some Loctite on each screw.
Tighten the screws crosswise (a, b, c and d).
Do not over-tighten the screws.
12810-1.indd 1-2 11/5/2013 3:13:35 PM