Product Manual
12V 200Ah(20hr)
AGM12V200AH
3% of capacity loss per month at 20
Fully charged battery 77
Length (mm / inch) 522 / 20.55
Width (mm / inch) 238 / 9.37
Height (mm / inch) 218 / 8.58
Total Height (mm / inch) 223 / 8.78
Approx. Weight (Kg / lb) 63 / 138.9
Nominal Voltage 12V
Design Life 10 years
Nominal Capacity 77
o
F(25
o
C)
10 hour rate (18.7A, 10.8V) 187Ah
5 hour rate (35.8A, 10.5V) 179Ah
1 hour rate (126A, 9.6V) 126Ah
Internal Resistance
o
F(25
o
C)
4.0mOhms
Self-Discharge
o
C(average)
Operating Temperature Range
Discharge
-20~60
o
C
Charge
-10~60
o
C
Storage
-20~60
o
C
Max. Discharge Current 77
o
F(25
o
C)
1000A(5s)
Short Circuit Current 3300A
Charge Methods: Constant Voltage Charge 77
o
F(25
o
C)
Maximum charging current 60A
Temperature compensation
-30mV/
o
C
Temperature compensation
-20mV/
o
C
20 hour rate (10.0A, 10.8V) 200Ah
Cycle use 2.40-2.45VPC
Standby use 2.20-2.30VPC
Weight deviation: ± 3%
*
≤
End Point
Volts/Cell
15min 30min 45min 1h 3h 5h 10h
1.60V 350 215 156 126 57.0 38.0 19.1
1.65V 340 207 150 122 55.0 37.0 19.0
1.70V 327 201 146 118 54.5 36.4 18.9
1.75V 310 195 142 115 52.9 35.8 18.8
1.80V 261 182 137 112 50.5 35.2 18.7
End Point
Volts/Cell
15min 30min 45min 1h 2h 3h 5h
1.60V 607 392 288 227 137 108 72.6
1.65V 586 380 280 222 135 106 71.6
1.70V 569 373 274 218 132 104 70.8
1.75V 561 363 269 214 128 100 69.9
1.80V 538 355 265 212 125 97.0 69.0
20h
10.8
10.6
10.4
10.2
10.0
and oxygen, special one-way valves allow the gases to escape, avoiding excessive
immobilized. Should the battery be accidentally overcharged producing hydrogen
The AIMS Power AGM maintaince free batteries are lead-lead dioxide technology.
proof. Usable in any orientation.
pressure build-up. The battery is completely sealed, maintenance-free, and leak
The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus
Component Positive plate Negative plate Container Cover Safety valve Terminal Separator Electrolyte
Raw material Lead dioxide Lead ABS ABS Rubber Copper Fiberglass Sulfuric acid
Battery Construction
No water filling.
No electrolyte maintenance.
for efficient gas recombination of up to 99%.
General Features
●
Absorbent Glass Mat (AGM) technology
●
Not restricted for air transport-complies
with IATA/ICAO Special Provision A67.
●
●
Can be mounted in any orientation.
●
Computer designed lead, calcium tin alloy
grid for high power density.
●
Long service life, float or cyclic
applications.
●
Maintenance-free operation.
●
Low self discharge.
●
●
Performance Characteristics
Number of Cells 6
Dimensions and Weight
Discharge Constant Current(Amperes at 77° F 25° C)
o
o
Discharge Constant Power (Watts at 77°°° F 25° C)
oo
All data may be changed without notice.
page1 of 2
www.aimscorp.net
(Note)The above characteristics data are average values obtained within
three charge/discharge cycles not the mimimum values.
Recognized component.