Model NO.: PE60012230S WARNING : Please read this manual in its entirety before using or connecting this inverter. It includes important instructions and safety tips.
SPECIFICATION 1. Use of advanced micro processor . 2. Cooling fan with intelligent temperature control. 3. USB power supply. (EN) Model Power supply Voltage Output voltage Output frequency Output wave form Continuous power output Peak power output Under voltage safeguard Over voltage safeguard USB outlet Fuse Operating temperature Dimension(LxWxH) Weight Cooling fan (IT) PE60012230S 12VDC 230VAC 50Hz Pure sine wave 600W 1200W 10VDC 16VDC 5V, 1A max 2x40A 0-104°F 8.4x5.51x 2.92 in 3.7lbs/4.
4. ASSEMBLE 1. Location First ensure that there is enough space to install the inverter, while the installation location must meet the following requirements: (1) Dryness: Avoid dripping water or other liquids on the inverter. (2) Coolness: The operating temperature for the product is 32-104° F(0-40°C), the preferable temperature is 50-77°F(10-25°C), the lower temperature is better within this range.
5. Thermal protection: The unit will be hot during operation. If the temperature is higher than 149°F(65°C), the inverter will automatically shut down. Then the buzzer will whistle continuously and the green light is off, red light is on. Please turn off the inverter, and continue using it after the temperature goes back to normal temperature naturally. Meanwhile find out the factors causing the fault, such as ventilation, ambient temperature, vent, load power and so on. It can avoid similar problems.
