DC TO AC POWER INVERTER MODEL NO.PWRINV200012120W PWRINV300012120W PWRINV360012120W USER'S MANUAL Listed to UL 458 and CSA22.
Model No. Output Power Output Power Surge AC Output Voltage Regulation Output Wave Form Dc Input Voltage Low Battery Alarm Low Battery Shut Down Frequency Efficiency No Load Current Draw Over Temperature Protection PWRINV200012120W PWRINV300012120W 2000W 3000W 4000W 6000W 120V 120V + + 10% -10% Modified Sine Wave Modified Sine Wave 10-15V 10-15V + 0.5V + 0.5V DC 10.5VDC 10.5V+ + DC 10V-0.5V DC 10V-0.5V 60Hz 60Hz 90% 90% <1.0A <1.
Model No. Output Power Output Power Surge AC Output Voltage Regulation Output Wave Form Dc Input Voltage Low Battery Alarm Low Battery Shut Down Frequency Efficiency No Load Current Draw Over Temperature Protection Overload Protection Input Short Circuit Protection AC Output Socket Input Current Maximum load at DC 10V input Dimensions Net Weight PWRINV360012120W 3600W 7200W 120V + 10% Modified Sine Wave 10-15V + 0.5V DC 10.5V+ DC 10V- 0.5V 60Hz 90% <2.
Keep clean for better and safer performance periodically
For the power inverter to work properly, your power source must provide 12 volts DC, and the power source must provide enough current (i.e., 46 amps to operate the load of 560 Watts or under). Caution: This inverter must only be connected to batteries with a nominal output voltage of 12 volts. Lower voltage will not operate the inverter properly, and more voltage could damage the inverter or the device being powered.
rated continuous
5. Digital Display, Function Button, and LED The inverter is equipped with a digital display to monitor input DC volts, DC amps, AC output watts and error codes. A Display Selector button allows the user to advance the display readout to the next readout. The status of a LED shows which function is being shown on the Digital Display. The display and button are used to help diagnose problems if they occur.
NOTICE: THE OUTPUT OF THIS DEVICE IS NOT SINUSOIDAL. IT HAS A TOTAL HARMONIC DISTORTION OF 35.792 PER CENT AND MAXIMUM SINGLE HARMONIC OF 29.297 PER CENT. FOR USE WITH SWITCH MODE POWER SUPPLIES, LINEAR POWER SUPPLIERS, CLASS 2 TRANSFORMER, SHADED POLE MOTOR, FAN MOTOR.
Power, Inc
