Datasheet

Series AMLD-Z
Up to 1000mA | LED Driver
www.aimtec.com Tel: [phone] Toll free: + 1 888 9 AIMTEC
(924 6832)
F 051e R12.B 2 of 13 North America only
General Specifications
Parameters Conditions Typical Maximum Units
Switching frequency 100% load 20 - 500 KHz
Operating temperature -40 to +85
o
C
Storage temperature -40 to +150
o
C
Derating See derating curve
Maximum case temperature 110
o
C
Thermal Impedance Free air convection +30
o
C/W
Cooling Free air convection
Humidity 95 % RH
Case material Non-Conductive Black Plastic (UL94-V0 rated)
Weight 12.5 g
Dimensions (L x W x H) 1.25 x 0.80 x 0.49 inches 31.75 x 20.32 x 12.45 mm
MTBF > 950 000hrs (MIL-HDBK-217 F at +25
o
C)
Maximum Soldering Temperature 1.5mm from case for 10sec. 260
o
C
NOTES:
1. Reversed polarity at the input power will damage the driver. The input ground must not be connected to the negative output.
2. Leave the pin VADJ opened if not used, grounding VADJ will shut the driver off, connecting VADJ to +Vin will damage the driver.
3. Maximum output open voltage is equal to input voltage.
Safety Specifications
Parameters
Standards Designed to meet EN 55015 (CISPR22)
Pin Out Specifications
Pin Single
2 - V Input - DC Supply
3 - V Input - DC Supply
4 Vadj PWM/ON/OFF or not used
9 - V Output LED Cathode connection
11 - V Output LED Cathode connection
14 + V Output LED Anode connection
16 + V Output LED Anode connection
22 + V Input + DC Supply
23 + V Input + DC Supply
Derating