User's Manual

ln order to improve performance, there will be changes in product features
without prior written notice, please refer to actual contents in the package.
APPLICATION
Sterilization for any of surfaces, such as phone, mask, key, nail scissors,
eyeglasses, and cosmetic tools.
SAFETY PROTECTION
Built-in particular safety switch, the UV LED light will be shut off once the sterilizing
box is opened.
STERILIZATION PRINCIPLE
UVC LED light kills bacteria by destroying DNA or RNA, to stop them from
reproducing ang generating.
UVC LED DEODORIZATION
UVC waves can deodorize by decomposing the molecular structure of odor.
Power Button UV Lamp Wireless Charger
DC Power Interface USB-A Port USB-C Port
INDICATOR STATEMENT
SN Working Status
Start Up
Stand By
Sterilizing
Power light solid on
Each light will be on in a
sequential order
Each light flash sequentially
lndicator
WARM TIPS WARRANTY CARD
Warranty:
www.alnec.com
TECHNICAL PARAMETERS
PACKING LIST
Model Number V-UVP-102
Overall Dimension
Inner Dimension
8.7x5.1x2.0 inches
7.1x3.8x0.9 inches
Input
Output
12V 2.5A
5V 2.4A Max
Disinfection Mode UVC-LED
UV Wavelength 253.7nm
Wireless Charge Power 10W
LED Beads 12 pcs
Temperature
Working Temperature: 32~104 F
Storage Temperature: -4~131 F
Sterilizing Box x1
1 2
Power Adaptor(DC Cable) x1
3
Sterilization Testimonial x1
User Manual x1
4
NO WASHING & SOAKING
NO TRAMPLING
DO NOT EXPOSE TO EYES & SKIN
CHILDREN PROHIBITED
1.Use the default adaptor for power supply, otherwise the product will
get damaged.
2.Keep operation away from strong magnetic field objects.
3.Remove the mold smell of cosmetic tools, It will be more obvious when you
sterilize for few times more according to the concentration of the odor.
4.Study the manual carefully and thoroughly, keep it properly.
Pls save the AI or PDF file,Pls confirme AI or PDF file, and make sure all be correct, if any difference or file missing,pls feel free point it
PRINT 1:1 SIZE
LZZ
HOWINTRODUCTION TO OPERATE?
2.Open the lid and place the desired suitable materials in the multifunctional UV
sterilizer box.
1.Plug in the default power adaptor.
3.Turn on the device via the “power” button to commence sterilization.It will
automatically timing for 10 minutes, power will be turned off after sterilizing
finished. Sterilization lasts for 10 minutes.
4.To wireless charge the device, place the desired phone on top of the
multifunctional UV sterilizer box. Charge begins once this is done.
UVC LED STERILIZING BOX
MODEL:V-UVP-102
DC Power
Interface
Brand ALNEC
Phone
Email
[phone]
[e-mail]
Address
4054 148th Ave NE Redmond,
WA 98052, USA
Website www.alnec.com
Thank you for choosing ALNEC products.For your rights and in your
interest,please keep this warranty card safe.If there is any quality complaint,-
kindly contact the dealer.
With this card, you have rights to free maintenance service of your device
within the first year of purchase(1 year warranty), if quality problems or device
failure is duly checked and approved by ALNEC’s technical staff as a
manufacturer’s error
Your warranty will not hold under the following circumstances:
1.If during the warranty period, the device is repaired by a non-ALNEC staff,
Installed or used improperly, or transported carelessly.
2.If the damage is caused by the customer during installation, disassembly,
or usage.
3.If the warranty card is lost or damaged.
Note:The manufacturer reserves full rights to modify this appliance without
public notice
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,and
(2) this device must accept any interferencereceived, including interference that
may cause undesired operation.
RF Exposure Statement
This equipment complies with the FCC RF radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20cm between the radiator and any
part of your body.
FCC Warning
This device complies with Part 18 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE : Any changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user's authority to
operate the equipment.