User's Manual

2029 Becker Dr
Lawrence, KS 66047

10. Parameter Query and Change
The GUI tool supports parameter query and change for Wayv Air.
1. Click ‘System config’ icon, check corresponding boxes and click ‘Query’ on the bottom,
then it will shows current parameter
2. Change parameter(s), then click ‘Config' on the bottom to complete

Here is the description of all parameter boxes:
● Production No: The Serial Number of Wayv Air device
● WiFi work mode: User can select either ‘AP Mode’ or ‘Station Mode’
● 485 address: Address of RS485
● 485 baud rate: The default baud rate of RS485 is 115200
● Server address: The IP address of WiFi server that Wayv Air connecting, default is
‘192.168.4.65’
● Server port: The port number of WiFi server that Wayv Air is connecting
● WiFi name: WiFi name in AP Mode
● WiFi password: WiFi password in AP Mode
● WiFi insert name: WiFi name in Station Mode
● WiFi insert code: WiFi password in Station Mode
● Radio switch: User can select shutdown RF temporarily or permanently. When RF is shutting
down, Wayv Air will stop working and no target will be displayed on GUI window
Proprietary information
Page 22