User's Manual

2029 Becker Dr

Lawrence, KS 66047



Note:  ONLY Wayv Air hardware with high-speed RS485 interface hardware can support point and

cloud display. Please specify ‘Require high-speed RS485 interface’ when ordering or contact us before

shipment.

12. Reset

Wayv Air provides two methods to reset the device:

1. In GUI, type ‘restoreConf’ in CFG (See details of CFG in Section 8). After device rebooting,               

confirm all WiFi parameters are reset to the default values.

2. Keep pressing the button till the LED turns green, then release the button and wait for the                

reset process to complete, this process usually takes about 30 seconds. After device rebooting,             

green LED flashes if there is no object, and confirms all WiFi parameters are reset to the                

default values.

After reset, all information/parameters/setting will be reset to the default, including:

● WiFi name: Device Serial Number

● WiFi password: 12345678

● RS485 baud rate: 115200

● RS485 ID: 1

Proprietary information

Page 26