User's Manual
2029 Becker Dr
Lawrence, KS 66047
4.2 Device Status LED and Interface Description
1. Status LED
○ System Booting: Magenta blink
○ Firmware Flash: Blue blink
○ Firmware Booting: Blue ON
○ Normal Operation: No Target -- Green blink; Target detected -- Magenta
blink
2. Reset Button
Long press to restore factory settings
○ Wifi Name: Device serial #
○ Password: 12345678
○ Serial Port Communication Baud Rate: 115200
○ Serial Port Communication ID: 1
○ Initial Configuration: Default
3. USB Type-C Connector
○ Power supply
○ Serial Port Communication
4. Device ID: Serial Number on device (See it under QR code on the back panel of
Wair Air)
5. WiFi Mode Connection
5.1 WiFi Connection for Single Device (AP Mode)
Wayv Air supports WiFi connection for single device (AP Mode), see following steps for
AP Mode connection.
Note: To make sure WiFi connection between Wayv Air and host PC is functioning properly, please
disable any anti-virus software and firewall on your host PC.
Proprietary information
Page 8