Instructions / Assembly

Z-style Barn Door

Installation Guide

aiopophomewoodwork@gmail.com

Please read instruction before you begin

Thank you for choosing Coast To Coast knotty pine wood barn door. Please read this instruction fully

before starting your barn door assembling. Not following the instruction can cause the unit warp or

shape change which will lead to unsafe manner and cause injury.

Any modification to the door will void the warranty and may cause the unit to work improperly.

The weight of the barn door requires minimal 2 people during installation. Always wear appropriate

personal protection equipment when using tools during the assembling.

Please avoid direct sunlight, moisture, these will cause future color shift or potential damage to the

product.

Please make sure ALL parts are included before assembling.

Tape Measure X1

Working Glove X1 Safety Goggle X1

Pencil X1

Rubber Mallet X1

Philips head

screwdriver X1

Power Drill X1 Drill bits 7/16”

1/8”Assorted X1

Speed Square X1 Clamps 50”X2 6”X4 Level X1

*Quantity will be changed due to dierent size choice

Please read instruction before you begin

*Middle planks quantity will be variable due to dierent size.

PAGE 1
Please read instruction before you begin Z-style Barn Door Installation Guide Please read instruction before you begin Thank you for choosing Coast To Coast knotty pine wood barn door. Please read this instruction fully before starting your barn door assembling. Not following the instruction can cause the unit warp or shape change which will lead to unsafe manner and cause injury. *Middle planks quantity will be variable due to different size. Please make sure ALL parts are included before assembling.
PAGE 2
Assembling Steps Step 1. Assemble Door Middle and Outside Planks Step 3. Secure the Cross Plank Once the top and bottom planks are installed, drill shallow pilot holes in door planks through diagonal cross plank, use the pre-drilled holes on the cross plank as your guide. Use screws that provided in the box to secure the cross plank. DO NOT drill completely through the door plank. Make sure the cross plank is still flush.